Home > PACKAGING MATERIAL > Polyolefin/POF shrink film

High performance Polyolefin Shrink FILM


                 POLYOLEFIN/POF FILM 

General Introduction:

The five-layer co-extruder polyolefin shrink film is a new environmentally friendly and non-toxic heat shrink packaging material. It is made using PE and PP as major raw materials and undergoing co-extruding and blow molding process. This helps to enhance the barrier, anti-oxidation, and anti-aging capacity.

The shrink wrapping or shrinking machine is used in the sales and transportation process of a variety of products. Its main role is to stabilize, cover and protect the products. The shrink film must have a high puncture resistance, good shrinkage and a certain shrinkage stress. In the shrinking process, the film can not generate holes.

1. Food
2. Beverage / Dairy
3. Candy /Confections
4. Daily Necessities
5. Stationery Goods
6. Chemical
7. Hardware/Tools

The shrink wrap is widely used in the packaging of a variety of products, such as food, medicine, disinfection tableware, stationery, craft gift, printed matter, hardware plastic products, telephones, electronic appliances and so on.

It is especially found use in the combined packaging of irregularly-shaped objects or commodities, not only meeting moisture and dust proof, theft and replacement prevention, transparent display and other functions, but also increasing the attractiveness of product appearance.

It can also be used instead of various paper boxes, both saving the cost of packaging and conforming to packaging trends.
The shrink film can be processed into flat pocket bag, arc-shaped bag, trapezoid bag, stereo bag, etc.

PVC shrink film or Polyolefin shrink film 

The first thing to do when looking for the right packaging material is analyse what you are packaging. This can affect the type of shrink film you use – consideration must be given to whether or not the product is edible, if multiple products need to be packaged together, if there are any sharp corners and whether or not the shrink wrap machine will be used indoors.

Historically, PVC film has been very popular, it was inexpensive and widely available. It has been widely used for CD/DVD packaging and wrapping boxes, software and other non-edible products. However, PVC film is brittle and not good for use with bundling multiple products, nor is it safe for use with food products. The other downside is that PVC production lines create odour and smoke as the film deposits on the sealing equipment and carbon build up on the sealing tools over time. Although PVC film has long been the film of choice, Polyolefin film has been growing in popularity over the past few years and is now almost as common as PVC shrink film.

Benefits of Polyolefin film

  • Environmentally friendly – easily recyclable

  • Lower cost per foot than PVC

  • It doesn’t become brittle and yellow with age

  • It’s more pliable than PVC film and does not tear easily

  • As a multi layer film the finished packs are very strong and presentable

  • It’s puncture resistant and tough

  • It gives better results where clarity and shelf life are important considerations

  • It gives better results when bundling multiple products

  • It’s approved for direct food contact

  • It doesn’t break down during the heat-sealing phase of packaging

  • It’s clean to use – less machine maintenance and a cleaner, higher quality overall appearance

  • No need to use Teflon curtaining over sealing wires

  • No smell or smoke when sealing – fine for use indoors

  • Most shrink wrap machines are capable of using both PVC and Polyolefin film. The heat required to shrink both types of film is about the same – so swapping to Polyolefin is easy.

Standard PACKAGE:

-- One roll, 2 rolls/ctn

-- standard pallet with stretch film wrapped



Q: Are you a factory or a trading company?
A: We are factory manufacturing packaging machines and packaging materials and we provide perfect OEM and after-sale service.

Q: How can I pay my order?
A: We accept T/T, Western Union paying methods. For those orders less than 500USD, we accept PayPal to pay.

Q: How i know the quality?
A: welcome to visit factory for quality approval or we send you sample to test on the machine. 


- Payment: 30% T/T deposit payment in advance, balance against copy of B/L, L/C...
- Production lead time: 5 - 20 working days after deposit payment.
- Shipping methods: Ocean freight.
- FOB shipping port: QINGDAO/SHANGHAI, mainland China.
- If you want to deal with EXW/CIF/CNF term instead of FOB, please specify. Otherwise, FOB price will be quoted under inquiry.

- Your inquiry related to our product & price will be replied within 24hours.

- Well-trained & experienced staff are to answer all your inquiries in English of course.

- Working time: 8: 30am - 6: 00pm, Monday to Friday (UTC+8).
- OEM & ODM projects are highly welcomed. We have strong R&D team here to help.
- Your business relationship with us will be confidential to any third party.
- Good after-sale service offered, please get back if you got question.


We will be waiting for your further contact,and hoping to do good business with you in the near future.Thanks!